Top of the page

Scott Lenticular Backflush Plates

Please scroll down to view the available product options Backflush Plates: Regeneration of modules includes a backflush followed by a forward flush. While backflushing is very effective at removing larger surface caking on the outside of the filter media, a forward flow regeneration helps to dissolv

Options

Item No.AvailabilityPriceQuantity
65105NVE
65105NVI
65106NVE
65106NVI

Description

Please scroll down to view the available product options

Backflush Plates:
Regeneration of modules includes a backflush followed by a forward flush. While backflushing is very effective at removing larger surface caking on the outside of the filter media, a forward flow regeneration helps to dissolve the soluble material within the matrix of the media.

Backflush plates are highly recommended for regenerating the media. The plates provide additional support and reduce the risk of possible tearing or deformation of the modules, not just during backflushing but also during forward flow regenerations, as well as during filtration at higher differential pressures. Backflush plates consist of end plates as well as thicker intermediate plates for more than 1 stacked disc.

The end plates appear somewhat loose and are not held down tightly. The backflush plate set was ultimately designed to work with the turbulence of the liquid during a regeneration or filtration to protect the media and ensure a longer lifespan of the modules and quality of the filtrate.

Please contact Scott Labs to verify whether your modules are compatible with Seitz Supradisc II backflush support plates.

Additional guidance for the regeneration of your Supradisc II lenticular modules can be found here.

How to size Backflush Plate sets for each housing:
For 1-high housing: 2 end plates are needed
For 2-high housing: 2 end plates and 1 intermediate are needed
For 3-high housing: 2 end plates and 2 intermediate are needed
For 4-high housing: 2 end plates and 3 intermediate are needed

Downloads
Lenticular Filter Module Regeneration Protocol
Scott Labs Lenticular Filter Housing Operating Instructions

Scott Lenticular Backflush Plates

Please scroll down to view the available product options

Backflush Plates:
Regeneration of modules includes a backflush followed by a forward flush. While backflushing is very effective at removing larger surface caking on the outside of the filter media, a forward flow regeneration helps to dissolve the soluble material within the matrix of the media.

Backflush plates are highly recommended for regenerating the media. The plates provide additional support and reduce the risk of possible tearing or deformation of the modules, not just during backflushing but also during forward flow regenerations, as well as during filtration at higher differential pressures. Backflush plates consist of end plates as well as thicker intermediate plates for more than 1 stacked disc.

The end plates appear somewhat loose and are not held down tightly. The backflush plate set was ultimately designed to work with the turbulence of the liquid during a regeneration or filtration to protect the media and ensure a longer lifespan of the modules and quality of the filtrate.

Please contact Scott Labs to verify whether your modules are compatible with Seitz Supradisc II backflush support plates.

Additional guidance for the regeneration of your Supradisc II lenticular modules can be found here.

How to size Backflush Plate sets for each housing:
For 1-high housing: 2 end plates are needed
For 2-high housing: 2 end plates and 1 intermediate are needed
For 3-high housing: 2 end plates and 2 intermediate are needed
For 4-high housing: 2 end plates and 3 intermediate are needed

Downloads
Lenticular Filter Module Regeneration Protocol
Scott Labs Lenticular Filter Housing Operating Instructions

Options

Item No.AvailabilityPriceQuantity
65105NVE
65105NVI
65106NVE
65106NVI