Scott 16 in Lenticular Filter Housing

Item No. LENT16
Design: Lenticular filter housing standing on 4 legs, closure by stainless steel bolts, sealing by silicone gasket, flat gasket style adapter for modules. Benefits: Filtration without product losses due to an enclosed design Filter requires less space than a standard plate filter due to its vertical
Backorder 1 in stock Available
Each
Price
From:
$5,050.00
Per Each
Excl. Tax
Product is not available for purchase online. Please contact us for more information.
Description
Design:
Lenticular filter housing standing on 4 legs, closure by stainless steel bolts, sealing by silicone gasket, flat gasket style adapter for modules.

Benefits:
  • Filtration without product losses due to an enclosed design
  • Filter requires less space than a standard plate filter due to its vertical design
  • Simple to load and break down- no need for wetting and re-tightening
  • Housings can be loaded with as few as one filter module*
  • Filter modules can be back flushed and reused multiple times**
*Additional equipment required.
** When using backflushable modules.


Includes all necessary fittings for filter operation.

Connections Tri-clamp:
  • Inlet/Outlet     1.5” TC
  • Gauge port       1.5” TC
  • Drain outlet      1.0” TC
  • Air vent               0.25” thread to hose barb
Materials:
316 stainless steel, sanitary construction

Surface Finish:
Mirror polished Ra<0.2μ

Includes: (each housing)
  • 2 Sanitary pressure gauges to record inlet and outlet pressure
  • 1 Stainless steel “T” to mount the outlet pressure gauge
  • 2 Butterfly valves for inlet/outlet and drain.
  • All clamps and gaskets
Technical data dome:
Maximum operating temperature: 140˚ C (284˚ F)
Maximum operating pressure: 10 bar (liquid pressure only)

Optional items for Lenticular housings (see related items above):
1-High center post for Lenticular filter housing.
Allows the housing to be used with only one filter module in it.
2-High center post for Lenticular filter housing.
Allows the housing to be used with only two filter module in it.
3-High center post for lenticular filter housing.
Allows the housing to be used with only three filter module in it.

Backflush plates:
Backflush plates are highly recommended when back flushing the SupraDisc II modules. The plates provide support to the modules and reduce the risk of possible tearing or deformation of the modules during the backward flow.

How to size Backflush Plate sets for each housing:
For 1-high housing: 2 end plates are needed
For 2-high housing: 2 end plates and 1 intermediate are needed
For 3-high housing: 2 end plates and 2 intermediate are needed
For 4-high housing: 2 end plates and 3 intermediate are needed

Lenticular Filter Setup and Usage



    Loading
    Loading