Rot Management in Whites & Rosés

Rot Management for Whites & Rosés

Recommendations



ROT MANAGEMENT STRATEGY

Rot management is a part of your integrated pest management (IPM) strategy. However, despite your best control strategies you may still have to harvest fruit compromised by Botrytis cinerea or other microorganisms. Botrytis grows intracellularly and infects fruit primarily under the grape skin, secreting a damaging and stable enzyme called laccase. In extreme cases Botrytis can cause “slip-skin”, making the fruit very difficult to handle.


When Botrytis or other rots are present on white grapes or red grapes destined for rosé production, the resulting wine quality can be negatively impacted. Depending on the mold present, as well as secondary bacterial infections, there can be serious enological concerns, such as oxidation and aromatic challenges. Clarification and filtration may also be affected. The goal is to maximize flavor, while minimizing the damage that the molds and bacteria can impart.


The first step in dealing with compromised fruit is to evaluate the mold level (both on the cluster, within the cluster and inside the berries) and to sort the grapes, separating the fruit so that you are dealing with the cleanest fruit available. Afterward, don’t forget to clean your picking bins as well as your winery equipment to minimize cross-contamination.


Tips for dealing with infected grapes

  • Analysis is key!
    • Pre-fermentation analysis (chemical and microbiological) allows you to make good winemaking decisions.
    • Post-fermentation analysis allows you to move forward while determining risk.
  • Consider a "reductive" style of winemaking./span>
  • Increase your initial SO2 addition, and consider using Lysozyme if secondary lactic infections are evident.
  • Minimize time between picking and inoculation - fast processing is important.
  • Choose a yeast with a short lag phase, low VA production and good aromatic production. Increase your yeast dose to ensure a fast start to fermentation.
  • Consider co-inoculation with ML to get your wine protected earlier, with an emphasis on fruit and freshness.
  • Separate juice lees and heavy fermentation lees ASAP, as the lees contain most of the laccase.
  • Keep tanks/barrels topped and treated with SO2
  • Minimize oxygen exposure at all stages and manage pH.
  • Do not blend laccase positive and laccase negatives wines.
  • If heat treatment is available, that is a very good tool to deactivate the laccase.

ROT ASSESSMENT

Visual Test

  • Count number of infected clusters per vine and determine the % of the fruit infected
    • <1% proceed as normal
    • >1 - <5% further sorting
    • 5-20% - treat with care as fruit needs special consideration
    • >20% extreme measures to save fruit

Sensory Evaluation

  • Make notes on the taste and smell of the fruit so that you can determine the impact on wine quality.

QUALITATIVE & QUANTITATIVE TESTING

Qualitative and Quantitative tests are available and should be used to determine risk. Adapt an appropriate winemaking strategy to optimize wine quality.

Qualitative Test for Laccase Activity:

  • Place three samples (~50ml) of must in clean glasses and cover.
    • Glass one – Control
    • Glass two – Add 60ppm SO2 and leave at cellar temperature
    • Glass three – Add 60 ppm SO2and place in the refrigerator
  • After 24 hours access for changes in color or quality. If laccase is present, then the control and the glass held at cellar temperature will be browner than the refrigerated sample. You may also have an oily film on the surface.

Quantitative (Laccase Unit) Test Interpretation for WHITE & ROSÉ Wines:

  • 1 laccase unit – Exercise caution (Increase SO2
  • 2-15 laccase units – Pro-active (Increase SO2, use enological enzymes and tannins- medium dose)
  • >15 laccase units – Aggressive intervention (Increase SO2, use enological enzymes and tannins higher end of dose recommendations)

Juice is very sensitive to damage from laccase and facility hygiene is key to avoid cross-contamination


MANAGING ROT BY STAGE

Winemaking Stage

Goal

Addition

Addition Rate

Notes

Harvest and Transport

Sort in the vineyard to remove as much of the compromised fruit as feasible. Start to protect from oxygen damage and microbial activity.

SO2 addition. Consider the use of Inodose Granules in the picking bins. Dry ice can also be used to lower the temperature of the fruit (slowing laccase activity).

This depends on pH and % of compromised fruit; it should be adapted accordingly.

In addition to your vineyard analysis, conduct a qualitative and quantitative laccase activity test, as well as a visual rot assessment.

Fruit Reception and Grape Processing

Sorting and fast processing is key, as juice/must is very sensitive to the damaging effects of laccase (oxidative browning), and moldy flavors.


Microbial control at this stage is essential to minimize any additional degradation of wine quality.


Gall nut tannin additions are highly beneficial at this time. They act as an anti-oxidant thereby helping to minimize the oxidative damage from laccase.


Enological clarification enzymes help to break down grape pectin chains. This allows you to treat the fruit gentler and pressing at lower pressure. The enzyme helps to liberate the laccase from under the grape skins so that you can treat early in the process.


Heat treatment at the juice stage can inactivate the laccase. If available, this should be considered.

Inodose Granules

As appropriate for the pH and laccase level.

Appropriate SO2 management offers some protection from oxidative browning.

Lysovin or Lyso-Easy easy to control lactic acid bacteria (LAB). If MLF is not desired, consider using Bactiless™ for control of LAB and acetic acid bacteria.

20g/hL

In color sensitive cultivars, then the addition of proteins (Lysozyme) at this stage can cause color-loss.

FT Blanc™, FT Blanc Soft™ or FT Blanc Citrus™

50-150 ppm (dosage depending on required treatment/laccase activity)

For FT Blanc™ and FT Blanc Soft™, add half of the dosage at the crusher and the balance at the start of fermentation. Add FT Blanc Citrus™ at the fermentation stage.

Scottzyme Cinn Free or Scottzyme Pec5L can be used before pressing

Cinn-Free dosage:
20-30mL/ton

Pec5L dosage:
15-20mL/ton

Respect a 6-8 hour time interval between enzyme and tannin addition. Tannins will remove enzymes.

Alcoholic Fermentation

You want a secure alcoholic fermentation. Use a yeast strain that will start quickly, promote good fruit character and texture while minimizing off flavors (VA, sulfides, and SO2). If MLF is desired you can consider a co-inoculation 24 hours post inoculation.

Lalvin T73™, ICV D21®, Rhone 2056™, GRE™, or Enoferm CSM™. If VA is not elevated in the fruit then D254®, or CVRP are good choices. If elevated SO2 is a concern then use ICV Okay™.

25-35g/hL

Increase the inoculum to have a good start to fermentation, and enter into the alcoholic phase as soon as possible.

Ferment no hotter than 80°F, this to promote good fruit flavors and minimize yeast stress.

Ferment on bentonite

Bentostab

10-20g/hL

Potential to bind laccase.

Fermentation Nutrition & Yeast Derivative Nutrients

Ensure that the yeast has the nutrients (macro and micro) available to conduct a rapid and clean fermentation.

To bind any potential pesticides, or moldy aromas.

To stabilize color and build a balanced palate.

Balance (potential) high alcohol.

GoFerm Protect Evolution™ during rehydration

Nutrient VitEnd™

OptiMUM Red™

Booster Rouge™

30-45g/hL

30g/hL

20g/hL

20g/hL

GoFerm Protect Evolution protects and stimulates the cells, minimizes lag phase, and compensates for nutrient deficiencies caused by molds. It replaces the thiamin has been deactivated if you used >50ppm SO2.

Fermaid O™ at 2-3 brix sugar drop

10-40g/hL

This is to nourish the cells minimizing heat spikes, yeast stress while promoting good aromatics.

Fermaid K™ or Fermaid O™ at 1/3 sugar depletion

10-40g/hL

This replaces nitrogen used during the yeast growth phase.

Pressing and Racking

Taste throughout the fermentation process to determine skin contact length. In the most challenging situations you may have to shorten your time on skins. Run a quick laccase activity test to determine browning risk. Drain free run to a tank, and taste press fractions and isolate, keeping fractions separate if necessary. Let gross lees settle for 24-48 hours and then rack to a clean tank. Keep fractions separate for as long as necessary. Rack under a CO2 blanket if needed.

Malolactic Fermentation

Make sure you conduct post fermentation analysis so that you use a compatible MLF strain. If you added higher than normal amounts of SO2, your strain must be able to withstand this higher total SO2 level. Inoculate as soon as possible, even if wine is slightly sweet, but looks like it is going to complete alcoholic fermentation.

VP41™ or PN4™

1g/hL

Use strains that conduct a fast MLF, and produce texture-building polysaccharides.

ML Red Boost™

20g/hL

This will provide the bacteria with essential nutrients so that the ML can be conducted in a timely manner.

Post Fermentation Management, Aging and Fining

Keep running the qualitative laccase assessment. A quantitative analysis may be conducted to determine risk. Protect wine from O2 until the risk is low. Manage your topping and SO2 regime. Conduct trials with cellaring tannins due to their structure building and anti-oxidant qualities. If wine is slightly moldy in the nose or mouth, then gelatin trials can be run, and if oxidative browning is causing challenges, then casein or PVPP can be trialed.

Scott’Tan Tannin Complex™, Estate™, Refresh™.

Gelatins:

Colle Perle and Inocolle

Caseins:

Caseinate de potassium, Polycacel, and Polycel

Bench trials can be conducted to determine dose based on wine style and desired outcome.

Protein fining may de-stabilize color.

Filtration

The wine may have filtration issues if complex polysaccharides are present (glucans, pectins, etc). It may be useful to conduct a filterability test. If the filterability test fails and the wine is clean, you may wish to conduct trials with Scottzyme KS®, or Lallzyme MMX™. Lallzyme MMX™ may take up to 6 weeks to break down the glucans. For a guide to managing filtration please see Filter Grade Selection by Measuring Turbidity.

Packaging

Trial tannins under our Luxe range. Scott'Tan Royal, Scott'Tan Radiance and Scott'Tan Onyx are designed to bring out elegance, complexity and balance. Due to their production process, they can be used up to 48 hours before bottling. Protect your aromas from oxidation throughout the packaging process.



Loading
Loading