Cartridge Filter End Cap Guide
How to Choose the Correct End Caps for your Housing
ScottCart Pre-Membrane PP Cartridges are pleated depth filters designed for particle removal during the beverage production process. ScottCart cartridges were designed specifically for the retention of particles from water and specialty beverages for consistent filtrate quality, and have been optimized for a wide range of pre-filtration applications.Shop ScottCart Cartridges
Designed to be used with cartridge filter housings, all housings require end caps for proper use. Our in-house experts have put together this short guide to help you find the appropriate end caps that will fit your housing. The code to use when ordering your filter is shown in the list below. Please reference our individual product data sheets to find detailed ordering information.
Code 7: 226 O-Ring
The Code 7 (226 O-Ring) is designed to fit with a code 7 cartridge housing. The specific design has two locking tabs that twist and lock into place. Code 7 cartridges have a fin on the opposite end.
Code 8: 222 O-Ring
The Code 8 (222 O-Ring) is designed to fit with a code 8 cartridge housing. The specific design has no locking tabs. Code 8 cartridges have a fin on the opposite end.
Code 3: 222 O-Ring
The Code 3 (222 O-Ring) is designed to fit with a code 3 cartridge housing. The specific design has no locking tabs. Code 3 cartridges have a flat cap at the opposite end of the cartridge.
Need additional help? Send us a picture of your housing and our experts can help determine which size cartridge end cap will be the best fit.