Back

Velcorin for Cider Production: Applications & FAQs

Why Velcorin®?

VELCORIN® is a powerful microbial control agent produced by LANXESS. Since 1988, VELCORIN technology has been used in the United States in wine, low-alcoholic wine and juice, juice sparklers, sports drinks, and ready-to-drink teas. VELCORIN technology is very effective at low dosages against a broad range of yeast, bacteria and molds. Unlike other chemical preservatives, VELCORIN (DMDC) is non-persistent and does not affect wine taste, aromatics or color.

Applications & Uses

Below are the primary applications and uses for VELCORIN technology in wine production:

  • To help prevent refermentation in finished ciders and/or perries
  • To reduce or eliminate sorbic acid
  • To decrease the amount of sulfur dioxide used in ciders and/or perries
  • Expanded packaging options

Frequently Asked Questions

Q. How does VELCORIN work?

A. VELCORIN controls microorganisms by entering the cell and inactivating some of the key enzymes required for cell function. Specifically, DMDC is thought to react with the histidyl residues of proteins, including those involved in the active site of many enzymes. Susceptible enzymes are consequently rendered functionless due to blockage of the active site and/or conformational changes in structure. Excess DMDC then completely hydrolyzes in the presence of water.

Q. What factors determine VELCORIN effectiveness?

A. The effectiveness of VELCORIN technology depends on microbial type, microbial load and other factors. At low doses, VELCORIN (DMDC) is very effective against yeast. At greater doses, DMDC is also effective against bacteria and certain fungi. Pretreatment of wine must reduce the microbial load to less than 500 microorganisms/mL. VELCORIN is not a replacement for good sanitation practices.

Q. How do I know that VELCORIN will work against my specific cider/perry microorganism?

A. While VELCORIN technology is effective against a wide array of microorganisms, the only way to know whether it will be effective in your wine environment is to run a VELCORIN Challenge test.

Q. Do I have to list VELCORIN (DMDC) as an ingredient on the label?

A. No, the FDA lists dimethyldicarbonate (DMDC) as a direct secondary food additive and therefore no labeling is required (21 CFR 101.100).

Q. How much VELCORIN can I use in my cider/perry?

A. The TTB allows up to 200 ppm total of DMDC to be used in cider and/or perry (27 CFR 24.246).

Q. How do I determine if VELCORIN was dosed correctly?

A. The most common analytical method for determining whether the desired ppm amount of VELCORIN product was added is by methanol analysis. Methanol is a naturally occurring by-product of fermentation and baseline methanol concentrations vary in wine. Therefore, samples for methanol analysis must be taken before and after VELCORIN product dosing to determine whether the desired level of VELCORIN product was achieved.

Q. What type of packaging is compatible with VELCORIN?

A. VELCORIN technology can be used with all known packaging options, including plastics (such as PET, PVC or HDPE), aluminum cans and bottles, glass, bag-in-a-box, stainless steel kegs and others.

Q. How long does VELCORIN remain active?

A. VELCORIN (DMDC) activity is based on its hydrolysis rate. Hydrolysis occurs when DMDC reacts with water to form methanol and carbon dioxide. The rate of this reaction is dependent on the temperature of the wine. At 10°C(50°F) it takes approximately four hours for DMDC to completely break down. At 20°C(68°F) breakdown occurs in about two hours.

Q. Why do I have to use a unique dosing system?

A. Due to the unique physical properties of VELCORIN and to help assure safe handling, LANXESS Corp. requires the use of VELCORIN DT dosing machines. DMDC is hydrophobic and solidifies at 17°C(63°F). The dosing machines are engineered expressly for VELCORIN to prevent solidification and aid in DMDC solubility. Temperature controls, specific safety features and a special metering system, are also incorporated into the design.

Q. How can I use VELCORIN if I don't have a dosing machine?

A. Scott Labs sells the VELCORIN DT Touch dosing machine from LANXESS, which can be purchased via one of our technical sales experts. Mobile VELCORIN service providers also provide on-site dosing. Click here to learn more about the DT Touch or view our list of mobile service providers.

Q. Is VELCORIN-treated cider and/or perry approved in countries other than the US?

A. VELCORIN approval is product and country specific. Please note that it is the exporter’s responsibility to ensure the -of products. For a current list of countries that allow VELCORIN-treated cider and/or perry, please contact us.

For more information on Velcorin for cider production, download our complete brochure.

Download Brochure

Have additional questions or want to purchase Velcorin? Fill in the form below and our team will be in touch.

Contact Us